High performance sprayers from Micron, UK.

AU 8115

Dimensions (frame of sprayer excluding spray head and support): 140 cm long x 76 cm wide x 85 cm high

Height of spray head above bed of vehicle: 180 cm

Weight (empty):130 Kg

Chemical tank: 100 liters capacity; UV stabilized polyethylene

Pump:12 V magnetically coupled centrifugal pump

Spray droplet size: Adjustable 40 - 200 microns VMD (depending upon formulation used and blade angle setting)

Spray band width: 10 - 100 meters (when using a drift spraying technique

Power source: 4 stroke petrol

Fuel capacity: 5.0 liters

Running time with full fuel tank:3 hours approx.

Electrical Requirements: 12 volts DC (vehicle battery): 5 amps (max)

NOTE: This specification is provided for reference purposes only and is subject to alteration without note.

AU 9100

* Fuel: Standard 93 – 95 octane unleaded petrol (gasoline) * Fuel tank:6.5 litre capacity steel with splashproof filler cap (provides approximately 3 hours spraying time) * Blower:250 m3/hour capacity rotary blower running at 3200 RPM

Dimensions:Length 1450 mm, width 650 mm, height 800 mm excluding sprayhead (1300 mm including sprayhead)

Spray release height:1250 mm above vehicle bed

Weight:210 Kg (tanks empty)

Engine:13 HP Honda GX series 4-stroke with recoil start

Fuel: Standard 93 – 95 octane unleaded petrol (gasoline)

Fuel tank:6.5 litre capacity steel with splashproof filler cap (provides approximately 3 hours spraying time)

Blower:250 m3/hour capacity rotary blower running at 3200 RPM

Sprayhead: Stainless steel construction with vortical nozzle and interchangeable outlet orifices to adjust droplet size

AU 9200

Dimensions: Length 1450 mm, width 650 mm, height 800 mm excluding spray heads (1300 mm including spray heads

Spray release height: 1250 mm above vehicle bed

Weight: 240 Kg (tanks empty)

Engine: 20 HP Honda GX series 4-stroke with electric start

Fuel: Standard 95 octane unleaded petrol (gasoline)

Fuel tank: 15 liter capacity steel with splash proof filler cap

Running time: 2.5 hours approx at full throttle

Blower: 500 m3/hour capacity rotary blower running at 3000 RPM

Spray head: Stainless steel construction with vertical nozzle and Interchangeable outlet orifices to adjust droplet size

Spray droplet size: Adjustable 15 – 25 μm VMD for oil-based ULV insecticides Adjustable 25 – 60 μm VMD for water-based ULVInsecticides measured with typical formulations)

Output rate: Adjustable 0 – 1.0 l/min (total from both spray heads)

Output adjustment: By adjustable valve or interchangeable fixed restrictor Orifices (AU9200M) or optional cab-mounted electronic (control (AU9200E)

Insecticide tank: 50 liter capacity HDPE construction with 180 mm filling aperture

Electrical power: 12 VDC @ 5 A (spraying), 70 A (engine start)

Power source: 12 V vehicle battery or integral 12 V 45 Ah battery (charged from engine of sprayer)

Control box: Mounted in cab of vehicle.

Switches: Electrical master Engine throttle Insecticide pump.

Indicators: Power on Blower operating Pump on Insecticide pressure

Mounting on vehicle: By M10 bolts through universal mounting base

ULVA + ( ULV (oil))

Weight - empty 0.8 Kg (with 1 liter bottle)

Weight - ready to spray 2.6 Kg (with 1 liter bottle)

Power Supply 9-12V DC (6-8 D-cell/R20 batteries)

Power consumption 1.5-2.0 watts (up to 20 hrs spraying with good quality batteries)

Disc speed 7,500- 10,000 rpm

Flow rate range 25-100ml/min

Droplet size 50-100 µm (VMD)

Spray pass interval 2-10m

ULVA + (LV (water))

Weight - empty 1.6 Kg (with 5 liter backpack)

Weight - ready to spray 7.5Kg ( with 5 liter backpack)

Power Supply 6-7.5V DC

Power consumption1.0-1.5 watts(up to 20 hrs spraying with good quality batteries)

Disc speed 4,000-6,000rpm

Flow rate range 50-200ml/min

Droplet size 100-150 µm (VMD)

Spray pass interval up to 3m